spec no: dsao6997 rev no: v.1a date: feb/25/2016 page: 1 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1201004076 3.5x2.8mm surface mount led lamp part number: AAA3528ESGCT high efficiency red super bright green features z both chips can be controlled separately. z suitable for all smd assembly and solder process. z available on tape and reel. z package: 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. descriptions z the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. z the super bright green source color devices are made with gallium phosphide green light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications. green red
spec no: dsao6997 rev no: v.1a date: feb/25/2016 page: 2 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1201004076 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity / luminous flux: +/-15%. * luminous intensity value is traceable to cie127-2007 standards. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1. wavelength: +/-1nm. 2. forward voltage: +/-0.1v. 3. wavelength value is traceable to cie127-2007 standards. 4. excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradat ion or premature failure. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. relative humidity levels maintained between 40% and 60% in pr oduction area are recommended to avoid the build-up of static electricity ? ref jedec/jesd 625-a and jedec/j-std-033. part no. emitting color (material) lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 AAA3528ESGCT high efficiency red (gaasp/gap) water clear 12 30 120 *8 *15 12 30 *12 *30 super bright green (gap) symbol parameter emitting color typ. max. units test conditions peak peak wavelength high efficiency red super bright green 627 565 nm i f =20ma d [1] dominant wavelength high efficiency red super bright green 617 568 nm i f =20ma ? 1/2 spectral line half-width high efficiency red super bright green 45 30 nm i f =20ma c capacitance high efficiency red super bright green 15 15 pf v f =0v;f=1mhz v f [2] forward voltage high efficiency red super bright green 2 2.2 2.5 2.5 v i f =20ma i r reverse current high efficiency red super bright green 10 10 ua v r = 5v parameter high efficiency red super bright green units power dissipation 75 62.5 mw dc forward current 30 25 ma peak forward current [1] 160 140 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsao6997 rev no: v.1a date: feb/25/2016 page: 3 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1201004076 AAA3528ESGCT high efficiency red
spec no: dsao6997 rev no: v.1a date: feb/25/2016 page: 4 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1201004076 super bright green
spec no: dsao6997 rev no: v.1a date: feb/25/2016 page: 5 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1201004076 AAA3528ESGCT reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsao6997 rev no: v.1a date: feb/25/2016 page: 6 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1201004076 packing & label specifications AAA3528ESGCT terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. if customer usage exceeds the spec ified limits, kingbright will not be respon sible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
